16v Mini Club Forums  

Go Back   16v Mini Club Forums > General Public Area > General 16v Mini Chat

Reply
 
Thread Tools Display Modes
Old 15-05-2018, 08:52 AM   #1
andyMac
Senior Member
 
Join Date: Oct 2008
Location: Derby
Posts: 239
Subframe: Other
CC: 1600
Make: Honda
ECU: Standard
Default brake hose kit - braided

Does anyone know of anywhere that makes up an entire kit for the mini brake pipes including all the unions etc... But rather than the usual copper ones that you have to bend yourself all made out of abraidable with the end fittings on?

I'm sure someone must have done this before?

If you don't know of anyone doing a kit, does anyone know all the lengths and end fitting size and types I'd need to put an order in to get them al made up from somewhere?

thanks
andyMac is offline   Reply With Quote
Old 15-05-2018, 10:59 AM   #2
gadget555
Senior Member
 
Join Date: Jan 2011
Location: Strichen Aberdeenshire
Posts: 1,237
Subframe: Watson
CC: 1800
Make: Rover
ECU: K maps 160 Race
Default

You could have a look here; https://www.venhill.co.uk/line/build/
Or I got all mine from here; http://stores.ebay.co.uk/Torques-U-K?_rdc=1
I will say though it can work out expensive when making up your own lines if you choose the wrong type of fitting, plus making your own lines up can be a bit of a mine field when it comes to mot as the VOSA site states that you can't use any fitting's that are compression fittings like the ones I've used from Torques, as they recon that the fitting could come apart! So all I've done is put 1" lengths of heat shrink over the fittings then after pressure testing the system I shrunk them over the fittings so they can't be seen to be screw type ones. Mine passed it's mot in Feb with no problems
gadget555 is online now   Reply With Quote
Old 15-05-2018, 09:31 PM   #3
loud_sam
Junior Member
 
loud_sam's Avatar
 
Join Date: Apr 2018
Posts: 7
Subframe: Allspeed
CC: 1800
Make: Honda
Default

I use a company near me called Brakes international they have made quite a few braided hoses for me on my different project cars. They made all my braided brake lines for my mini and the brake lines and clutch lines for my Mercedes and they sourced the fittings for my Mercedes for me and they had the mini brake fitting in stock. They might be able to help you out if you knew the sizes of hoses you needed and any special fittings.


Sent from my HTC U11 using Tapatalk
loud_sam is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 04:47 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.