Wanting to get 140-160bhp

[tobiasnugent]

out of my swift gti engine i found a website that sells everything really
what would be the easiest way to get this power ?
and whats the safest measurement to bore to with out it being un reliable.

[mininut]

shove some gas in it with a controller.

[GARNDI]

Easy way Turbo or as mininut said NOS.....

You can get 150BHP "Genuine @ the wheels" with a WRX TD04 (around 12PSI) on the standard 10:1 C/R. Need aftermarket ECU or a Turbo chip.

76mm is as far as you would want to go on the G13b....

[tobiasnugent]

i was thinkign about going to like 74 or something

[GARNDI]

i was thinkign about going to like 74 or something

74mm is standard.

[tobiasnugent]

ill get 75 then

[OzMidnight]

...and what website was it that you found?

[tobiasnugent]

http://suzukird1.netfirms.com/62pro/catalog/index.php?cPath=7&&page=2

that one i do beleive it still excists

[miniswift]

Hi tobiasnugent,

If you are serious about it, then speak with Garndi.
He hasn't told you but he is one of fastest Swift Gti owner.
If you search his user name in youtube, you will see his car in Oz.
He is over in UK for 2 years, so take this oppotunity and get much info from him as possible.
Also, Ozmidnight is from Teamswift as well and he had mk1 Gti with R1 carbs and cams. So you cannot go wrong with their advice.

I will take those 2 guys advice anyday :wink: ....

Yes, Oz I haven't done any work on my car....
You know what it is like with summer holiday with kids....

Cheers
Atchi

[tobiasnugent]

i will do i think iv just found my mini shell to start on so its all go go go now

[OzMidnight]

If I remember suzukird prices, you can do better by looking around more. Some of their claims of outputs were also just plain ridiculous.

[tobiasnugent]

i cant seem to find many sites tho could you recommend any ?

[miniswift]

Hi,

What are you after?
What is your budget?

Camshafts wise, Kent, piper, cat name but few and also teamswift.
Exhaust manifold, you can search in teamswift or redline but it is better off staying std.
Exhaust, I heard that 2" is what you want for it(I got 1.75" for mine).
Under drive pulley, try teamswift website.
Flywheel lightening, take photo from teamswift and get it done.
Cylinderhead, Bill Falkner in Scotland (he is the best man for G13B NA engine, I have benn told).

Above is just little list.

Cheers
Atchi

[tobiasnugent]

due to insurance reassons i think iam gonna stick witht the standard for now