PDA

View Full Version : ecu pins


Swiftmini
05-06-2008, 08:55 AM
could people please post the pin outs for the stock mk2 ecu,

iam trying to wire up the engine but I only have mk3 diagrams.

so far got fuel pump but no sparks!

could be my knackered dizzy though

cheers

Pete_H
05-06-2008, 11:16 AM
I'm after a mk2 wiring diagram for my clocks.

I have mk1 and mk3 but cant find a mk2 anywhere.

Did you give up on megasquirt?

Swiftmini
05-06-2008, 11:58 AM
Did you give up on megasquirt?

yes and no. I have melted it about 3 times. LOL.

I think it'll work, but its not wired up anymore and I'm missing most connectors.


also most rolling roads in the area won't touch as most peeps down thi neck of the woods reckon its cack.

my car is virtually mot ready for the last 18months but it doesn't run.

I have most definitely spent enough on ms to have gone dta, emerald etc instead. :)

I have considered changing engine. I have 4 zetec and 2 rsturbo lsd boxes.


anyways myself and smurfy both use stock dials, although mine were a pig as we had no diagrams.

cheers
kev

Pete_H
05-06-2008, 10:14 PM
Just stick with it. I havent started wiring up my MS yet but dad thinks he has it under control.

Good luck getting it runing.

mk2 wiring diagrams would be useful over the next few days.

ed4ran
06-06-2008, 04:46 PM
I have one i have used. Probably the same as the mk3, as they where very similar anyway (mk2 phase 1, mk2 phase 2 is the mk3)

I cant upload it at the mo, but i can email if you want.

Ed

ed4ran
09-06-2008, 04:19 PM
This should work, has done on our '92 Mk2 Phase 1 :D

Ed

http://i299.photobucket.com/albums/mm296/ed4ran/ECU.jpg

Pete_H
10-06-2008, 10:22 AM
hey ed,

Have you got the rest of the mk2 manual?

If you have, can you email it to pdh3@aber.ac.uk?

cheers

ed4ran
10-06-2008, 03:58 PM
Zipped its 109mb, and i think me email account limits 4mb for emails :?
Ill see if i can use a different one.

Swiftmini
11-06-2008, 08:45 AM
Thanks Ed that should work nicely, only hope i can find all the spare components like the igniter, dizzy etc.

cheers
kev

ed4ran
11-06-2008, 09:11 PM
Yes i dont have any of that for mine :S, might get some incase i ever want to play about with standard stuff (mainyly for the mini gearbox project)