Question about megasquirt and injectors

[Pete_H]

The standard Suzuki G13b injectors read about 3 Ohms... so can I get away with the standard Megasquirt flyback circuit, or do i need to add the flyback board or injector resistors ?

cheers

[ed4ran]

What version of MS board are you running?
V3 you can use the built in flyback circuit,
V2 you need to add the flyback board.

[Pete_H]

its v3. Cheers ed...you always have the answers :)

[ed4ran]

lol, its only cos ive done it before, and blown a set of injectors :lol:
I had the v2.2 board and was told id be ok without the flyback board,
i wasnt :(

[miniswift]

Hi Ed,

What's going on with your bro?
He said he is leaving Mini scene...

I hope nothing serious.

Anyway, how are you doing with G13B on Mini gearbox project?
Did you managed to make any exhaust flange?

How is your car behaving now?

Update!!!

Cheers
Atchi

[ed4ran]

lol, Yeah he is just having a break from mini'ing. although he will keep the mini. So he just wont be online at least not mini sites.

Things for me have been delayed with me moving, but i think ive settled now, although i dont have a garage, i am tempted to bring the engine/gearbox to my flat and have it in my bedroom :lol:
Im saving for some more tools which should help with the build of parts.
Want a TIG so i can play with ally (and yes i wont be very good to start, but you have to start somewhere).
Also would like a hobby mill (as well as every other tool i can think off :lol: )

Yes i have had some flanges cut, i basically had one of each done.
I have a mild steel one with MY name on it, but it was intended for you :lol:
The only thing with the flanges is the holes turned out a little weird :|

Still trying to solve the problem with the alternator / charging,
I stole my brothers alt and that works as far as the ign light goes out (my one didnt) when you start the engine, but its running on the battery, so i may replace the main power leads or at least give the connectors a dam good scrub. :( main problem is getting parts etc.
Not having a garage doesnt seem to help.
Apart from that it was running fine. :lol:

Sometimes i am tempted to stick a stock ecu setup on there as everything else is stock!! :lol: lol but then id need a harness, dizzy, ecu, etc.

Ed