PDA

View Full Version : 1.6 zetec

shaun wynne
12-10-2009, 04:18 PM
does any body now how the wiring for a 1.6 zetec could be done to get the engine running in a mini
garyshoose
12-10-2009, 10:26 PM
Get a full loom and bin the mini one. Easiest option in the long run, and more reliable.
Simples
15-10-2009, 10:31 PM
Use ESC about 3 wires!:):)
tomfc
15-10-2009, 11:52 PM
Use ESC about 3 wires!:):)

My mate uses that for bangers, does the engine actually run to any sort of performance though?
Simples
18-10-2009, 01:36 PM
My mate uses that for bangers, does the engine actually run to any sort of performance though?

As far as I'm aware they run fine,mines still on the standard ECU (in a Fiesta:oops:) Mine started running rough as I have no Lambda sensor.
dannyb
18-10-2009, 06:32 PM
Seen ESC running of 140 BHP 2.0 Zetec fiesta and a few others, Failing that Magajolt and carbs?
shaun wynne
19-10-2009, 03:04 PM
am finking about using the complete loom from the fiesta but will i need the clocks
and what sort of job is it 2 wire the car loom in 2 the fiesta loom or would i need the dash loom
dannyb
19-10-2009, 09:00 PM
Your best be would be to look onto a ford site such as passionford