k series on a pg1

anyone know whether a pg1 box works on a k series, i have a 1.4 spi, and would like to use the box from my t series, the flange looks similar but im not sure about the issues with the clutch and the ecu flywheel sensor, looks like the flywheel sensor might be in a different place.
sean.

[BigAndy]

from what i understand, the t series pg1 box has a different case to the k series pg1 box. They are given the same name because they have the same internals, but the casings are slightly different, to fit their respective engines.

Have you given up on your T series conversion?

ok, so if i got a bell housing for a k series pg1, then as long as the input shaft is the same, i might be able to put this box on a k series.
from what you say i should be able to get a box for an mgf or something with a pg1 and a k, then this will fasten straight up to the 1.4, that might be the way to go then.
be worth the expense as i could use the hubs from the mgf, and the handbrake is also good for my application.
the mini project has not been given up on, but i've got a load of difficulties to overcome, and the events of substantial building work on the house, the mini's got shoved to one side.
i want to get my trike ready for next summer hence the action.
sean.